 |
 |
 |
|
BOOT SAVERS - Economical solution for wear on toes of work shoes
- Easy to apply; Comes with sandpaper and adhesive;
- Provides an additional barrier to prevent scuffing and slows down wear
- Sold by the pair
Directions 1. Trace outline of Toe Guard directly onto boot.
2. Sand area outlined on boot. Sand the inside of the Toe Guard.
3. Area to be bonded must be lean, dry and free of oil.
4. Apply SAR 10 Adhesive to both surfaces to be bonded.
5. Press together firmly. Allow to dry for 12 hours. Manufacturer: Moneysworth and Best
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Safety shoes and work boots often lose their protective properties after only a few months of normal use. This is due to the premature wear at the most frequent points of contact. One in particular is the toe area. Until now, to ensure their safety, workers or their employers had to replace their worn footwear in order to comply with safety standards. This meant significant annual cost for companies and independent workers. By extending the life of the footwear, Boot Savers represent significant savings for workers and their employers.
- Boot Savers are flexible, molded pieces of synthetic material that adhere to the toe of safety shoes or boots. They include a specially formulated glue to hold them firmly in place. Ideal for safety-toed shoes, work boots, hiking boots, or any other type of rugged footwear that you want to protect from premature wear.
|
|
|
|
|
|
|
Boot toe saver caps 
